FUEL SAVINGS. CLEAN ENGINE. ELIMINATES SMOKE. Q & A Are there side-effects to using BioMax MP? There is no risk on the engine. Once carbon and gum deposits are flushed out, the engine simply regains power and more. However, in highly worn engines, the orifice of the injector tips may be enlarged and partly clogged by gum and carbon deposits. Once these are dissolved, the enlarged nozzles will deliver a rich fuel mix. Fuel wastage and white smoke will be evident. In this situation, replace the injector nozzle tip. During initial use or blend ratios above 10% debris from the fuel lines arising from the cleaning action will be collected and accumulated in the fuel filter. Replace the filter as needed. How much savings can be expected with the additional cost of BioMax MP? BioMax MP will provide a host of benefits. Improvement in fuel mileage varies with vehicle condition. Old or poorly maintained vehicles may realize as much as *25% in fuel savings. This is immediately noticeable from initial use. In addition, continued use extends service intervals and results in a more satisfying driving experience. How much BioMax MP should be used? A full tank with a blend ratio of 20% will quickly dissolve gum and carbon deposits in the cumbustion chamber, acting like a liquid overhaul. This is recommended for first time use. For ongoing use, a 1-2% blend yields the optimum mileage and minimizes smoke emission. There is no danger in using 100% BioMax MP. The higher the blend, the greater will be the lubricity, cleansing, and combustive action. A proportional reduction in harmful gases like CO, NOx and SOx will be experienced with higher blends. Comparison between Diesel and BioMax MP Diesel Enhancer DIESEL PARAMETER BIOMAX MP BENEFITS 51 Cetane Number 68* Better ignition / good acceleration 49°C Flash Point 114°C Safer to handle and store 0.05% Sulfur Content 0% No Sulfur Oxide emission 0% Oxygen Content 11% Complete Combustion, less smoke 3-4 cst Kinematic Velocity 2-3 cst Better atomization 3,800 gms Lubricity (BOCLE) >7,000 gms Enhances efficiency of fuel pump 360°C T90 Temperature 313°C Better Velocity range Certificate of Additive Registration Control No: DOE-CFAR 04-04-11-CME Conforms to: ASTM-6751-02 (US), DIN EN-14214 (Europe) *National Renewable Energy Lab US Department of Energy USAGE GUIDE (Diesel Engine Only) 1. BioMax MP mixes easily with diesel at any blend ratio. No alteration is needed on the engine. 2. Pour BioMax MP into fuel tank each time before filling. It will mix readily with diesel during filling. 3. Recommended usage (blend ratio):       For Engine Cleaning: 20% (4:1 ratio)   For Ongoing use:      1%  (99:1 ratio)     4. BioMax MP is superb for cleaning and auto-detailing work. It is effective in removing hardened asphalt, gum, and grease smudges from car paint.       Caution: This is not an engine oil additive. Do not mix with engine oil. This product may deform certain types of rubber and plastic. Wash off excess immediately. Keep container sealed until ready for use. Use within 60 days after opening. BENEFITS 1. Improves mileage and fuel economy 2. Boosts engine power and acceleration 3. Reduces smoke and harmful emissions 4. Cleans and lubricates the fuel system 5. Lowers maintainance and operation costs 6. Reduces engine wear 7. Safe to handle and biodegradable